It’s quite frustrating to walk into a shower and just get a small trickle of water. Or maybe you’re attempting to wash the dishes, but it takes twice as long since the kitchen faucet isn’t strong enough. If these situations seem similar, your facility probably doesn’t have enough water pressure.
You don’t have to live with poor flow for the rest of your life, though. Installing a pressure booster pump is frequently easier than re-piping your whole house.
This piece of equipment is like the muscles in your plumbing system. It makes sure that water gets to all of your taps and appliances with the right amount of force. Knowing how these pumps work may make a big difference in how you use water every day, whether you’re having trouble filling your overhead tank or getting your RO purifier to perform well.
What is a pump that boosts pressure?
A pressure booster pump is a machine that raises the pressure of a fluid, like water, so that it can flow faster and with more power. It functions like a fan. A booster pump has an impeller within that rotates to move water, just like a fan has blades that spin to move air.
Why the water pressure in homes goes down
Knowing why the problem arises might help you fix it. Low pressure usually happens because of:
Gravity: If your taps are close to the height of the above tank, gravity doesn’t pull hard enough.
Distance: As water moves via long pipes from the primary source, friction lowers the pressure.
When more than one tap or shower is operating at the same time, the system has a hard time keeping up.
Old Pipes: Rust and dirt that build up within older galvanized pipes can slow down the flow.
A dependable home water pressure booster pump fills in this gap by collecting water from the source and pushing it through your pipes with the right amount of power.
How a Pump for Boosting Pressure Works
The way a pressure booster pump works is simple yet works well. In most cases, the system needs a motor and one or more impellers.
How it Works in Simple Terms
The pump’s intake lets water in. The electric motor turns the impeller once it gets inside. This spinning motion adds kinetic energy to the water, which makes it push out through the outlet with more force.
The motor, impeller, and pressure sensor all have jobs to do.
The motor: This is what powers the impeller to turn.
The Impeller: This is the part that spins and propels the fluid.
Pressure Sensor/Switch: This sensor in an automated water pressure booster pump knows when a tap is turned on. It tells the pump to turn on right away and off when the tap is closed, keeping the pressure steady without any help from a person.
Different Kinds of Pressure Booster Pumps
There are differences between pumps. You could need a different setup depending on what you need.
Booster Pump with One Stage
This design employs one impeller to raise the water pressure. For smaller houses or flats with mild pressure needs, this is usually plenty.
Booster pump with many stages
A high-pressure water booster pump with numerous stages is best if you need to transport water up several storeys or need a lot of power. These units contain more than one impeller, which adds pressure at each step to make a strong output.
Automatic Pressure Booster Pump
These are the most common choice for homes nowadays. They come with controls that can tell how fast the water is flowing. The pump turns on automatically when you switch on the shower. Paqos and other well-known brands provide reliable automated systems that work perfectly with household plumbing.
RO Pressure Booster Pump
To push water through a semi-permeable membrane, Reverse Osmosis (RO) devices need a lot of pressure. A lot of the time, the normal tap pressure isn’t enough. A certain RO water pressure booster pump makes sure your water purifier works well and cuts down on water waste.
Advantages of Putting in a Pressure Booster Pump
Putting in a pressure booster pump changes the way your water system works. This is why homeowners and facility managers put them at the top of their lists:
Strong and steady water flow: No more trickles. You receive a constant flow via all the outlets.
Better Shower and Tap Performance: Take a shower that feels like a spa and clean the kitchen faster.
Faster Filling of the Overhead Tank: If you get water from the city to fill a roof tank, a pump makes the operation go much faster.
An RO water pressure booster pump makes sure that your drinking water system makes clean water without having to stop and start all the time.
Helps Appliances: Washing machines and dishwashers typically need a certain amount of pressure to work. A pressure booster pump makes sure they do.
Where It Is Used
We commonly think of these pumps as being used in single-family houses, but they may be used for a lot of other things as well.
Residential Homes: To raise the pressure for everyday tasks like showering, gardening, and other duties.
Apartments and high-rise buildings need a household water booster pump system to make sure that people on the top level have the same pressure as people on the first floor.
Commercial Buildings: Office buildings need to keep the pressure steady in their toilets and cafeterias.
Hotels and hospitals need a lot of water and can’t afford to have the pressure drop, thus they need commercial-grade pumps.
How to Pick the Best Pressure Booster Pump
Choosing the wrong pump might waste energy or break pipes. Here are the most important things to think about:
LPM (liters per minute) flow rate
This tells you how much water the pump can move by measuring it in Liters Per Minute (LPM). To find out what rate you need, figure out how many taps you may utilize at once.
“Head” is the vertical height that the pump can lift water. If you live in a three-story house, you need a pressure booster pump with a larger head capacity than someone who lives in a single-story house.
How Much Power It Uses
Look for motors that use less energy. A pump with more horsepower (HP) requires more electricity, so pick a size that fits your demands without going overboard.
Automatic vs. Manual
For ease of use, an automated water pressure booster pump is strongly suggested. You have to turn manual pumps on and off, which isn’t practical for most domestic uses.
Brand Trustworthiness and Warranty
Pumps work hard all the time and deal with water all the time. Buying from a well-known company like Paqos guarantees that you will get long-lasting parts, exceptional customer support, and a strong warranty.
Tips for installing and keeping up with
Proper installation is a must if you want to get the most out of your pressure booster pump.
Proper Pipe Connection: Make sure the diameters of the inlet and output pipes meet the pump’s requirements so that the motor doesn’t have to work too hard.
Do not let the pump run dry. This might break the mechanical seal. A lot of new Paqos pumps have dry-run protection built in.
Vibration Pads: Put the pump on rubber pads to keep noise from traveling through the floor.
Regular Maintenance: Every few months, check for leaks and listen for strange sounds.
Common Issues and How to Fix Them
Over time, even the best pressure booster pump may have problems.
If the pump doesn’t start, check the power source and the fuse. The flow switch might get jammed if the pump is automated.
Low Pressure Even After Installation: The impeller could be blocked or there might be an air lock in the system.
Problems with noise: This usually means that the bearings are worn out or that the pump isn’t securely attached to the ground.
If the pump turns on and off quickly, there may be a leak in your home’s plumbing or a broken pressure tank.
Questions and answers about pressure booster pumps
Does a pressure booster pump raise the cost of my water?
Yes, if your water is metered. You will probably consume more water in the same length of time since the pump speeds up the flow rate. This might make your bill higher.
Is it compatible with the city’s water supply?
Yes, you may put a home water pressure booster pump on the main line. But some cities and towns have rules prohibiting sucking straight from the main line, so make sure to verify your local laws. Installing it after an underground storage tank is frequently safer.
Is it safe for RO systems?
Standard booster pumps are too strong for RO membranes that are fragile. You need to utilize a special RO water pressure booster pump that is made just for filtering systems.
How much power does it use?
The size of the motor (HP) and how it will be used will determine this. But most homes can generally handle the amount of water that a pressure booster pump uses because it only operates when you open a tap (if it’s automated).
Last Thoughts
You don’t have to live with low water pressure. A pressure booster pump is a useful and effective way to improve your quality of life by making showers better and appliances work better.
Choosing the proper equipment is important, whether you need a domestic water booster pump system for your apartment or a high-capacity unit for a business facility. Paqos and other brands provide a variety of solutions that are made to last and work well for diverse purposes. Check how much water you use, talk to a professional if you need to, and put up a pressure booster pump to get a strong, steady flow of water every day.